Contemporary woodworkers are also familiar with wood putty which, unlike wood filler, is almost always made from synthetic ...

Wood filler is often used as a term describing all sorts of filling agents, including wood putty, but also epoxy fillers, acrylic fillers, water-based fillers, solvent-based fillers, auto-body fillers ...

Then, secure them with epoxy sealer. Use a putty knife to apply epoxy sealer along the entire length of the crack. Cover the bases of the injection ports. Spread the sealer about 1/8-inch thick ...

Epoxy-based grout comes in a two-part mixture ... repairs at a later date could be difficult or impossible. Then use a putty knife to carefully scrape any lumps of old grout, and vacuum again.

Wood putty is primarily for after finishing ... but some wood fillers are suitable for use both indoors and out. Typically, epoxy-based wood filler is durable enough for outdoor applications.

Start by using a degreasing cleaner on the full countertop surface. Follow up by applying a two-part epoxy putty to chips or cracks in the countertops. Once the putty is dry, use 150-grit ...

Mix this catalyst in at the proper ratio, stir, and use your putty knife to spread the mixture evenly over ... In this instance, you need to apply fillers, epoxy resin, and sometimes even fiberglass ...

We pressed the epoxy into small and midsize cracks in our basement wall and at the edge of the floor, then smoothed the surfaces with a putty knife. This epoxy was a bit more expensive than the ...

Cracks wider than about 1/8” must be filled, or they will show through the epoxy flooring. An acrylic or polyurethane caulk is forced into the crack and tooled smooth with a putty knife.

For a casing they’re using PVC pipe, and forming a cone to focus the thrust by using a what amounts to plumber’s epoxy putty. The capping agent for the finished motor is ground up kitty litter.

All of this was to protect the dashboard from what was to come next. He filled about half of the pocket with epoxy putty. We’ve seen this stuff used before in a similar project. He left a small ...